

KLINGER® Graphite Laminate SLF
High temperature gasket material with outstanding performance
KLINGER® Graphite Laminate SLF combines easy handling with outstanding long term sealing performance. It complies with the German TA Luft (Clean-air).
Basis
This material is composed of two layers of flexible graphite and a 0.3 mm thick high temperature resistant and firbre based insert.
Areas of application
KLINGER® Graphite Laminate SLF is recommended for applications in which graphite is the material of choice and minimal fugitive emissions are required.

Typical technical data for thickness 2 mm
Density of the graphite layer |
DIN 28090-2 | g/cm3 |
1.0 |
Purity of graphite |
DIN 51903 |
% | > 99 |
Graphite and fibre based insert |
Thickness Number of sheets |
mm | 0.3 1 |
Compressibility |
ASTM F 36 A | % |
40 |
Recovery |
ASTM F 36 A | % | 14 |
Compression creep DIN 52913 |
16 h/ 50 MPa/ 300°C |
MPa | ≥40 |
KLINGER cold/hot compression 50 MPa |
Thickness decrease at 23°C Thickness decrease at 300°C |
% % |
42 10 |
Specific leak rate |
DIN 28090-2 |
mg/(s x m) | 0.05 |
Chloride content of graphite layer |
DIN 28090-2 |
ppm | ≤ 40 |
Function and durability
The performance and service life of KLINGER gaskets depend to a large extent on proper storage and fitting - factors beyond the manufactor’s control. We can, however, vouch for the excellent quality of our products. With this in mind, please also take note of our installation manual.
Downloads
Below you can find more product-related information.
Industries who we work with







